LG Repair in Sarasota, FL

Refrigerator not cooling, a UE or OE code on your washer, or a compressor that’s clicking instead of running? We specialize in LG refrigerators, washers, dryers, dishwashers, and ranges, and give you a straight answer before we touch anything.

Book Your Repair Today Call (941) 430-8787

100+ ReviewS

Licensed & Certified

100% Satisfied clients

Same Day Appointments

All Major Brands Serviced

Upfront Pricing, No Hidden Fees

LG Appliances We Repair

LG’s lineup runs on shared technology across categories, inverter linear motors, direct drive systems, and Smart Diagnosis, so a technician who knows one LG appliance well genuinely understands the others faster.

LG Refrigerators

French door, side by side, InstaView, and top freezer models. Linear compressor diagnosis and cooling failures are our most requested LG call.

LG Washers

Front load, top load, and TurboWash models. UE, OE, and LE codes are the most common reasons we get called out.

LG Dryers

Gas and electric models with Flow Sense venting technology, including the d80 through d95 airflow codes specific to LG.

LG Dishwashers

Direct drive, QuadWash, and TrueSteam models. IE and OE codes account for most of the calls we see on these units.

LG Ranges & Ovens

Gas, electric, and ProBake convection models. F code diagnostics and ignition issues are where most range calls start.

LG Refrigerator Common Issues and Error Codes

The most requested LG call by far is a refrigerator that’s stopped cooling, and there’s usually a specific reason behind it.

Known Issue

The Linear Compressor and Why It Matters for Your Repair

LG’s linear compressor was designed to run quieter and more efficiently than a standard compressor, but a documented number of these units have failed well before the compressor’s expected lifespan, sometimes going from working fine to producing no cooling at all within hours. A rhythmic clicking sound from the back of the fridge, every few seconds, is one of the clearest signs the compressor is trying to start and failing.

LG settled a class action lawsuit covering refrigerators manufactured between 2014 and 2017 and extended the compressor’s parts warranty to 10 years from the original purchase date on covered units. Additional legal action has since been filed covering newer models. None of this is legal advice, and coverage depends on your specific model and purchase date, but it’s genuinely worth checking before paying out of pocket for a compressor repair. We check your model and serial number against known coverage windows before quoting any compressor work.

LG refrigerator linear compressor diagnostic Sarasota

Symptom	Likely Cause
Rhythmic clicking from the back of the unit, no cooling	Linear compressor failing to start, often a sealed system issue
Compressor runs constantly but the fridge stays warm	Refrigerant loss, a failed reed valve inside the compressor, or a blocked evaporator
Freezer cold, refrigerator section warm	Evaporator fan failure or a blocked air damper between compartments
Ice maker not producing ice	Clogged water filter, frozen fill tube, or a failed water inlet valve
Water leaking onto the floor	Clogged defrost drain causing ice buildup that melts and overflows
Loud buzzing or humming	Evaporator fan motor wearing out, usually worsens gradually over weeks

A Quick Way to Tell What You’re Dealing With

If the compressor sounds completely normal and the fridge still won’t cool, don’t assume it’s fine just because it’s running. On LG’s linear compressors, an internal valve can fracture while the motor keeps turning normally, so the unit sounds healthy but stops moving refrigerant entirely. Pressure testing the sealed system is the only reliable way to confirm this, listening alone isn’t enough on this specific compressor design.

LG Washer Common Issues and Error Codes

LG washers display a specific code when a cycle stalls, which usually points straight to the cause before we even open the cabinet.

Code	What It Means	Common Cause
UE / uE	Unbalanced load detected during spin	Uneven load distribution, an unlevel machine, or worn suspension components if it happens on nearly every load
OE	Water won’t drain	Clogged or kinked drain hose, blocked pump filter, or a failed drain pump
IE	Water won’t fill properly	Closed supply valve, clogged inlet screen, or low water pressure
dE / dE1 / dE2	Door lock fault	Door not latching, a worn door strike, or a failed door lock assembly
FE	Overfilling detected	Stuck water inlet valve or a failed water level sensor
LE	Motor locked or stalled	Jammed drum, an overloaded wash, or a failing motor hall sensor
PF	Power failure during a cycle	Usually resolved with a restart, persistent PF points to a wiring or control board issue
tCL	Tub clean reminder	Not an error, appears after roughly 30 wash cycles as a maintenance reminder

UE, IE, and OE are usually worth checking yourself first, redistribute the load, check the supply valve, or clear the drain hose. dE, FE, and LE more often need a technician, especially if the code returns right after a reset.

LG Dryer Common Issues and Error Codes

LG dryers use Flow Sense technology to monitor vent airflow, which means several of their codes point directly at the vent rather than the machine itself.

Code	What It Means	Common Cause
d80 / d90 / d95	Restricted airflow detected by Flow Sense	Lint buildup in the vent line, a crushed duct, or a blocked exterior vent hood
dE	Door not fully closed	Lint or fabric caught in the door, or a worn door latch
tE1 / tE3	Thermistor fault	Temperature sensor reading out of range, often resolved with a hard reset
tE2	Thermistor fault during a steam cycle	Duct cooling too quickly during SteamFresh or Steam Sanitary cycles, common in cold conditions
PF	Power failure during a cycle	Usually resolved with a factory reset, persistent PF suggests a wiring issue
PS	Improper voltage at the power cord	Reversed wire connections on the terminal block, an electrical issue rather than the dryer itself
HE	Heating element or thermistor issue	Failed heating element or a temperature sensor that’s stopped reading correctly
LE	Motor locked or overloaded	Jammed drum or a failing motor, more involved than most other dryer codes

The d-series codes are the ones we see most often, and they’re genuinely useful diagnostically, a d80 almost always means the vent needs cleaning before anything else is checked. If the code keeps returning after a vent cleaning, that points toward the airflow sensor itself rather than an actual blockage.

LG Dishwasher Common Issues and Error Codes

Most LG dishwasher calls come down to water, either it isn’t coming in, isn’t draining out, or is showing up somewhere it shouldn’t.

Code	What It Means	Common Cause
IE	Not filling with water within the expected time	Closed supply valve, kinked inlet hose, or a clogged inlet valve screen
OE	Not draining properly	Clogged filter, kinked drain hose, or a knockout plug never removed on a new install with a disposal
AE / FE / E1	Leak or overfill detected by the flood protection system	Condensation pooling in the base pan, wrong detergent creating excess suds, or an internal leak
LE	Motor fault	A foreign object jamming the direct drive motor impeller, or a failing motor
BE	Control panel button stuck	Moisture or debris under a button, sometimes resolved by drying the panel fully

IE and OE are usually worth checking yourself first, confirm the water supply is on and the filter is clear. AE and FE codes are worth a technician visit if they keep returning after you’ve switched to the correct dishwasher detergent and confirmed the unit is level, since a persistent flood code can mean an internal leak.

LG Range and Oven Common Issues and Error Codes

LG range codes start with F followed by a number, and a couple of them are safety issues worth knowing before you try to keep cooking.

Code	What It Means	Common Cause
F1	Control board can’t monitor the heating relay	Safety relay failure, the oven should not be used until this is repaired
F2	Oven overheating beyond the safe range	Stuck heating relay or a failed temperature sensor, do not open the door, allow it to cool first
F3	Key or button short	Stuck or shorted control panel button, often moisture related
F4	Shorted oven temperature sensor	Failed sensor, usually needs replacement rather than a reset
F7	Convection fan or wire harness fault	Faulty wiring harness or a failing convection fan motor
F9 / F90	Oven not heating properly	Failed bake element, faulty igniter on gas models, or a bad temperature sensor
F10	Door locking system failure	Failed lock mechanism, often triggered during or after a self clean cycle

F1 and F2 are safety codes, turn off the breaker rather than continue using the oven. F9 covers most of our actual repair calls, often a burned out bake element on electric models or a failed igniter on gas models, both straightforward fixes once confirmed.

Is Your LG Appliance Worth Repairing?

LG’s higher end models pack in more electronics and proprietary parts than most builder grade brands, which changes the repair versus replace math a bit.

LG appliance repair versus replace Sarasota

Compressor and motor issues are often covered

If your refrigerator falls within a known compressor warranty window, or your washer or dryer motor is still within LG’s standard coverage, repair is almost always the right call regardless of the machine’s age. Always worth checking before assuming a big repair bill.

Control boards cost more on LG than on simpler brands

LG’s heavier reliance on electronic sensors and Smart Diagnosis means a control board replacement runs higher than it would on a more mechanical, less digital appliance. On a unit past 10 years old, this is often the point where replacement starts to make more sense.

Parts availability is generally strong

LG is one of the more widely stocked brands for common parts, motors, pumps, seals, and heating elements are usually available quickly rather than needing a long special order.

A repeat failure is worth a second opinion

If the same appliance has needed the same type of repair more than once in a short window, especially a refrigerator compressor, it’s worth asking directly whether replacement or an extended warranty claim makes more sense than repairing the same thing again.

LG Repair Costs in Sarasota

Real ranges by appliance type. Exact pricing depends on the model and is confirmed on site before any work begins.

Appliance / Repair	Typical Cost Range
Diagnostic / Service Call	$99 – $150 (waived if you approve the repair)
Refrigerator, Linear Compressor Replacement	$300 – $700 (often reduced or covered under warranty)
Refrigerator, Evaporator Fan or Sensor	$175 – $325
Washer, Drain Pump or Belt	$150 – $275
Washer, Door Lock Assembly	$150 – $250
Dryer, Vent Cleaning / Flow Sense Issue	$125 – $250
Dryer, Heating Element	$175 – $300
Dishwasher, Drain Pump or Motor	$175 – $325
Range, Igniter or Bake Element	$150 – $275
Range, Control Board	$300 – $550

LG Repair Questions, Answered

Specific questions about LG appliance repair in Sarasota. For general questions about our service, check our main FAQ page.

Why does my LG refrigerator keep clicking but not cooling?

A rhythmic clicking every few seconds from the back of the unit is one of the clearest signs the linear compressor is trying to start and failing. This is a documented issue on LG’s linear compressor design, and depending on your model and purchase date, the part may still be covered under an extended warranty from a past class action settlement. We check your model and serial number before quoting any compressor repair.

Is my LG refrigerator covered under the compressor class action settlement?

LG settled a class action covering refrigerators manufactured between 2014 and 2017, extending the compressor parts warranty to 10 years from purchase. A separate legal action has since been filed covering newer models. Coverage depends on your specific model and purchase date, so it’s worth checking before paying for a compressor repair out of pocket. This isn’t legal advice, but we do check known coverage windows before quoting compressor work.

What does the UE code mean on an LG washer?

UE means the washer detected an unbalanced load during the spin cycle. Redistribute the load evenly, confirm the machine is level, and restart the cycle. If UE appears on nearly every load regardless of how it’s packed, that usually points to worn suspension components rather than the laundry itself.

What does the OE code mean on an LG washer or dishwasher?

On both appliances, OE means water isn’t draining properly. Check the drain hose for kinks or clogs and clear the pump filter. On a dishwasher connected to a garbage disposal, OE can also mean the knockout plug inside the disposal inlet was never removed during installation.

What does the IE code mean on an LG washer or dishwasher?

IE means the appliance isn’t filling with water within the expected time. Check that the water supply valve is fully open, look for a kinked inlet hose, and check the inlet screen for mineral buildup blocking flow.

What does the LE code mean on an LG washer or dishwasher?

LE indicates the motor is locked or stalled. On a washer this often means a jammed or severely overloaded drum. On a dishwasher it can mean a foreign object is jamming the direct drive motor impeller. This code is one of the less DIY friendly ones and often needs a technician if a reset doesn’t clear it.

What does the d80 code mean on an LG dryer?

d80, along with d90 and d95, is part of LG’s Flow Sense technology and indicates restricted airflow in the vent system. This almost always means the vent line needs cleaning, either lint buildup inside the duct or a blocked exterior vent hood. If the code returns immediately after a thorough vent cleaning, the airflow sensor itself may need to be checked.

What does the tE code mean on an LG dryer?

tE, tE1, tE2, and tE3 all relate to the dryer’s thermistor, the sensor that monitors temperature. A hard reset, unplugging the dryer and holding the start button for 5 seconds while it’s unpowered, often clears a one time glitch. If the code returns after that, the thermistor itself likely needs replacing.

What does an F1 or F2 code mean on an LG range?

These are safety codes and shouldn’t be worked around. F1 means the control board has lost the ability to monitor the heating relay, which can allow the oven to heat without being told to. F2 means the oven has overheated beyond its safe range. In both cases, turn off the breaker to the range rather than continuing to use it, and don’t force the door open if it’s locked.

Why is my LG dishwasher showing an AE or FE code?

These codes mean the flood protection system detected water where it shouldn’t be, either condensation pooling in the base pan or an actual leak. Using the wrong type of detergent can create excess suds that also trigger this. If it persists after switching to proper dishwasher detergent and confirming the unit is level, it’s worth having a technician check for an internal leak.

Are LG appliances more expensive to repair than other brands?

Parts are generally well stocked, so straightforward repairs like pumps, belts, and heating elements aren’t significantly more expensive. Where cost can climb is control board and sensor work, since LG’s heavier use of electronics and Smart Diagnosis means more sophisticated components than a simpler mechanical appliance. Compressor and motor repairs are frequently reduced or covered by warranty depending on the model and age.

Do you work on all LG appliance types?

Yes, we service LG refrigerators, washers, dryers, dishwashers, and ranges, including InstaView, TurboWash, QuadWash, and ProBake convection models. LG’s appliances across categories share a lot of underlying technology, inverter motors, Smart Diagnosis, and similar sensor systems, so working across the lineup rather than just one appliance type genuinely helps with diagnosis.

Can Smart Diagnosis help before I book a repair?

It can narrow things down. LG’s Smart Diagnosis feature can show when an error first occurred, how many times it’s happened, and what cycle triggered it, which is useful context to have ready when you call. It doesn’t replace an in person diagnosis, but it can help confirm whether something is likely DIY fixable or needs a technician before we come out.

How much does it cost to have someone diagnose an LG appliance?

Our diagnostic fee runs $99 to $150 depending on the appliance and issue, and it’s waived if you move forward with the repair. This is standard across appliance types, refrigerator, washer, dryer, dishwasher, or range.

Get Your LG Fixed Today

Tell us what it’s doing and we’ll get a technician out fast. No obligation, no pressure, just a straight answer and a fair price.

Fill out the form. One of our reps will reach out to get your inspection scheduled.